Chromoly One Piece Pushrods, 3/8" diameter, and .080" wall (set of 16).
These one-piece, centerless-ground chrome molybdenum (also known as chromoly) pushrods are designed for use in hot rods, oval track race cars, drag race cars and marine applications - so you KNOW they're up to the task in your LS1, LS2, LS3, LS6, or LS7!
Machined to a tolerance of .001in and laser-etched with the "Tick Performance" logo, these pushrods not only perform great, but they look great as well. Made of SAE 4130 seamless tubing. Case hardened to RC60.
Don't see the size you need? These are available in anything from 7.000" through 11.550" long in 0.025" increments. Contact us for details!
Any of the following can affect pushrod length required and each application may be different:
- Cylinder Head Deck Thickness
- Block Deck Height
- Valve Stem Length
- Rocker Arm Brand
- Cam Shaft Base Circle Diameter
- Lifter Design, Etc.
We highly recommend that you measure you particular application to determine correct pushrod length due to the number of variables involved.
We cannot recommend a length based strictly on combination and the only way to determine required length is to measure appropriately.
NOTE: 3/8 pushrods may require modification to cylinder heads depending on engine and valvetrain combination.
*Item ships directly from vendor.