{"product_id":"improved-racing-windage-tray-for-up-to-4-stroke-ls-engines","title":"Improved Racing Windage Tray for up to 4\" Stroke LS Engines","description":"\u003cp\u003e\u003cstrong\u003eImproved Racing Windage Tray for up to 4\" Stroke LS Engines (Fits stock 3.622\" Stroke as well).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eImproved Racing's performance aluminum windage tray for LS family engines is a direct bolt-on replacement for the factory tray that clears up to a 4\" stroke and works with both factory studs and ARP studs.\u003c\/p\u003e\n\u003cp\u003eThese windage trays are 100% bolt-on compatible with factory LS oil pans. No need to grind, modify, or add spacers to your windage tray. No more oil starvation issues due to misaligned pickup tubes. Just bolt this on and everything will line up like factory!\u003c\/p\u003e\n\u003cp\u003eImproved Racing has designed this windage tray to maximize oil drainage while optimizing windage control. Made from aluminum, it weighs less than half as much as the steel factory tray for a weight savings of approximately 1.4 lbs. Compatible with all of the oil pans listed below, no modifications necessary.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClears all factory and aftermarket rods and crankshafts up to a 4\" stroke\u003c\/li\u003e\n\u003cli\u003eCompatible with many common LS oil pans, no modifications required\u003c\/li\u003e\n\u003cli\u003eOptimized to improve oil scavenging and windage control\u003c\/li\u003e\n\u003cli\u003eWorks with factory and ARP studs\u003c\/li\u003e\n\u003cli\u003eMore than 50% lighter than stock windage tray, made of 5052-H32 aluminum\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x EGM-241 aluminum performance windage tray\u003c\/li\u003e\n\u003cli\u003e10x locking flange nuts for factory studs (for ARP studs, use nuts provided by ARP)\u003c\/li\u003e\n\u003cli\u003e9x reducing bushings for use with factory studs\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits engines with factory or aftermarket rods and crankshafts up to a 4.000” stroke.\u003c\/li\u003e\n\u003cli\u003eCAD-verified to fit Gen III \u0026amp; IV LS \u0026amp; Vortec family engines with the oil pans listed in the table below.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes NOT fit engines with stepped main caps (Dart LS Next\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eengines).\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eEGM-241 may fit additional aftermarket oil pans if:\n\u003cul\u003e\n\u003cli\u003eThe aftermarket pan uses a dip stick tube that is compatible with any of the oil pans listed in the table below.\u003c\/li\u003e\n\u003cli\u003eThe aftermarket pan uses a pickup tube that is compatible with any of the oil pans listed in the table below.\u003c\/li\u003e\n\u003cli\u003eIf the aftermarket pan uses an aftermarket pickup tube, the pickup tube bolts to one of the main cap stud locations indicated in the figure below.\u003c\/li\u003e\n\u003cli\u003eCheck the dimensions above to verify that the aftermarket pan is deep enough to clear EGM-241. The shallowest part of the pan must be at least 1.72\" deep when measured from the gasket.\u003c\/li\u003e\n\u003cli\u003eAdditional trimming may be required for interference-free installation with aftermarket oil pickup tubes.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Improved Racing","offers":[{"title":"Default Title","offer_id":45667213115590,"sku":"EGM-241","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2716\/4086\/files\/improved-racing-improved-racing-windage-tray-for-up-to-4-stroke-ls-engines-1230741225.jpg?v=1774995008","url":"https:\/\/www.glennsautoperformance.com\/products\/improved-racing-windage-tray-for-up-to-4-stroke-ls-engines","provider":"Glenn's Auto Performance","version":"1.0","type":"link"}